NT Core

I can’t switch on my Nt Core
Please check whether you have inserted a charged battery.
Wed, 12 Sep, 2018 at 9:13 AM
My Nt Core immediately turns off again after I switch it on
Use a fully charged battery. If necessary, check the specifications of your battery and replace it.
Wed, 12 Sep, 2018 at 9:13 AM
My Nt Core turns off during training
Check the charge level of your battery. If necessary, replace the battery.
Wed, 12 Sep, 2018 at 9:15 AM
My Nt Core appears under a different colour code in the Nt App
The Nt Core has been set to a different colour. Change the colour ring, or enter the right colour in the Nt App under ‘Nt Core settings’.
Wed, 12 Sep, 2018 at 9:15 AM
One LED on the Nt Core status display is flashing, the other is permanently illuminated
The firmware is faulty. Please contact the Nt support team.
Tue, 11 Aug, 2020 at 7:22 PM
Determine the condition of the Nt Cores using the LED status indicator
Based on the table below, the status of the Nt Cores can be checked by the LED status indicator. If an error can not be remedied, contact the support team. ...
Tue, 11 Aug, 2020 at 7:28 PM
Battery Lid handling
When changing the battery of a NT Core, make sure to insert the battery lid in a straight way, as shown in the attached video.
Thu, 18 Apr, 2019 at 11:23 AM
Discolored contacts
When the contacts of your NT Core show signs of rust or any other discoloration, please clean them using non-corrosive cleaning agents until all discolorati...
Tue, 9 Jun, 2020 at 9:29 AM